Product Information

Silberline Start

012601

2601 Aluminum Pigment

PRODUCT DESCRIPTION

2601 is a leafing aluminum pigment paste grade. It offers good leafing properties, hiding power and high whiteness/brightness decorative effect.

-Leafing

-Cornflake


PRODUCT APPLICATION

2601 is very suitable for offset, gravure printing inks, aerosol can coating, reflective coatings providing mirror effect in the lower acid value resin system.


TECHNICAL DATA

Grade

325 mesh grade

Moisture Content

0.15 Maximum


INCORPORATION GUIDELINES

The paste should be pre-soaked in a paste:solvent ratio of between 1:1 to 3:1. Pre-soaking generally takes from one to eight hours. In general finer grades require longer pre-soaking duration compared to coarser grades. If using solvent alone is not feasible, the liquid coating medium can be substituted, but the dispersion time may be extended. Use low shear, slow speed mixing to achieve a smooth consistency mixture until it is free from aggregates. High shear dispersion techniques should not be used as they will destroy or distort the aluminum pigment flakes affecting the overall intended aesthetic effect.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2022 Silberline Manufacturing Co., Inc. All Rights Reserved.