Product Information

Silberline Start

01AQUASIL® BP SO

AQUASIL® BP SO Inhibited Aluminum Pigment

PRODUCT DESCRIPTION

AQUASIL BP SO is a fine particle size, non-leafing inhibited aluminum pigment with good opacity for water based industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used with chromatic pigments to produce colored metallic effects.

-Non-leafing


PRODUCT APPLICATION

This grade is for use in waterborne general industrial coatings.


TECHNICAL DATA

Grade

325 mesh grade

Screen Analysis (Max Retained)

1%

Non-Volatile By Weight (Target)

63% by weight

Non-Volatile By Volume (Calculated)

37.4% by volume

Particle Size-Microns (Target)

17

Aluminum Flake Content (Calculated)

54.3% minimum by weight

Specific Gravity

1.49

Weight Volume (lbs/gallon)

12.43

Weight Volume (kgs/liter)

1.49

Solvent

Mixture of mineral spirits, high aromatic, nitroethane and propylene glycol ether


INCORPORATION GUIDELINES

The paste should be pre-soaked in co-solvent at a paste:solvent ratio of between 1:1 to 3:1. When formulating aqueous inks, the pH of the system should be kept as close to neutral as possible. Pre-soaking generally takes from one to eight hours. Finer grades typically take longer than coarser grades. Use low shear, slow speed mixing to achieve a smooth consistency free of agglomerates. High shear dispersion techniques should be avoided, as they will distort the aluminum flakes.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2022 Silberline Manufacturing Co., Inc. All Rights Reserved.