Product Information

Silberline Start

01L-60158

L-60158

PRODUCT DESCRIPTION

LX-60158 is a high-grade one which create the unique metallic finish of higher purity and whiteness and smoothness. This is narrow particle size distribution. suitable for a variety of paints .

-Non-leafing

-Silver Dollar


PRODUCT APPLICATION

LX-60158 is used for a variety of paints, such as automotive OEM paints, car refinish, home appliances and general industrial paints.


TECHNICAL DATA

Screen Analysis (Max Retained)

0.1 Maximum

Non-Volatile By Weight (Target)

65.0

Particle Size-Microns (Target)

9

Moisture Content

0.15 Maximum


INCORPORATION GUIDELINES

Though satisfactory results may be obtained by careful addition of the product to the liquid vehicle, the recommended method of incorporation is to briefly soak the product in 1-2 times its own weight of co-solvent. Dispersion is achieved by low energy stirring, using a slow speed blade capable of moving the whole mass. This pre-mix is then slowly added to the agitated bulk of the binder. If it is necessary to use high shear to dissolve or disperse any component of the binder, this should be done before introducing the pre-mix. High shear should be avoided as it bends and breaks the flakes, reducing both brightness. This grade may be system dependent, trials are recommended to verify the required level of performance.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2022 Silberline Manufacturing Co., Inc. All Rights Reserved.