Product Information

Silberline Start

01SILBERCOTE™ J72402-20Z

SILBERCOTE™ J72402-20Z Aluminum Pigment


SILBERCOTE J72402-20Z is a coarse particle size non-leafing aluminum pigment paste grade. It is a polymer encapsulated grade. It has excellent chemical resistance and electrically conductive resistance and also exhibits high sparkle and brilliancy effect which is popular among solvent based industrial coatings.


-Polymer encapsulated

-Silver Dollar


SILBERCOTE J72402-20Z is very suitable for general industrial applications where good chemical resistance and/or electrically conductive resistance is needed.



325 mesh grade

Screen Analysis (Max Retained)

1.0 Maximum

Non-Volatile By Weight (Target)

58% by weight

Particle Size-Microns (Target)


Moisture Content

0.15 Maximum

Shelf Life

365 days from manufacture date.


The paste should be pre-soaked in a paste:solvent ratio of between 1:1 to 3:1. Pre-soaking generally takes from one to eight hours. In general, finer grades require longer pre-soaking duration compared to coarser grades. If using solvent alone is not feasible, the liquid coating medium can be substituted, but the dispersion time may be extended. Use low shear, slow speed mixing to achieve a smooth consistency mixture until it is free from aggregates. High shear dispersion techniques should not be used as they will destroy or distort the aluminum pigment flakes affecting the overall intended aesthetic effect.


Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.

All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2023 Silberline Manufacturing Co., Inc. All Rights Reserved.