Product Information

Silberline Start

01SILBERCOTEĀ® PC-4852X

SILBERCOTEĀ® PC-4852X Aluminum Pigment

PRODUCT DESCRIPTION

SILBERCOTE PC 4852X is an inorganically surface treated, medium particle size, silver dollar aluminum pigment. This grade is supplied as a dry powder to offer greater application versatility. To reduce environmental contamination and the explosion risk of dry aluminum flakes, it is packaged in bags permeable to air but not the metal. SILBERCOTE PC 4852X provides a very bright, sparkle effect. SILBERCOTE PC 4852X is suitable for use in printing inks, automotive and powder coatings applications.

-Non-leafing aluminum flake pigment

-Dry powder form

-Dust containment packaging


PRODUCT APPLICATION

SILBERCOTE PC X can be formulated into post-blend and bonded metallic powder coatings. The inorganic surface treatment on the flake imparts improved chemical and environmental resistance properties in the final coating. This product is recommended for automotive parts and accessories.


TECHNICAL DATA

Screen Analysis (Max Retained)

0.1% retain on 325 mesh

Non-Volatile By Weight (Target)

99.0% minimum weight

Particle Size-Microns (Target)

33

Specific Gravity

2.60


INCORPORATION GUIDELINES

For powder coatings, the packaging should be cut open and the pigment gently combined at up to 5% loading with the powder coating to provide a ready-to-spray composition. For liquid coatings, the bag may be cut open and the contents allowed to discharge gently onto the surface of the solvent. If using solvent alone is not feasible, the medium can be substituted, but dispersion time may be extended. Dispersion is best achieved by low energy stirring, using a blade capable of moving the whole mass. Further solvent or medium may be added at this stage. When a smooth consistency, free of aggregates has been obtained, the remainder of the formulation can be slowly added. High shear should be avoided as it causes flake damage, thereby reducing brightness. Gassing resistance in water-based media will also be reduced.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2022 Silberline Manufacturing Co., Inc. All Rights Reserved.