Product Information

Silberline Start

01SILVET® AD Premier 011

SILVET® AD Premier 011 Aluminum Pigment

PRODUCT DESCRIPTION

SILVET AD Premier 011 presents an exceptionally bright, fine particle size, silver dollar grade of non-leafing aluminum flake pigment in an easily handled, low dusting, dry, granular form. The high metal content has been chosen to maximize formulation flexibility while ensuring easy dispersibility in printing ink applications. This grade is especially suitable for solvent-based gravure and flexographic inks, in which it displays optimum opacity and adhesion, particularly on polymer films. SILVET AD Premier 011 is dispersible in all common organic solvents, except aliphatic hydrocarbons. It is compatible with a wide range of film formers, such as NC, PVB and acrylics, but is unsuitable for water-based systems.

-Exceptionally bright, fine aluminum flake pigment

-Widely compatible

-Low dusting

-Dry granular form

-Excellent adhesion in solvent-based inks


PRODUCT APPLICATION

SILVET AD grades are non-leafing aluminum pigments designed for use in solventborne flexographic and gravure inks to provide optimal adhesion to polymer films and other substrates. They are similar to Silberline’s SILVET “J” technology, but have been reformulated to improve adhesion properties. SILVET AD grades are supplied in pellet form composed of 80% aluminum pigment and 20% carrier resin. The carrier resin contributes to the resin solids of the ink formulation. Cost savings can be realized by adjusting the resin solids of the ink to accommodate the resin contribution from the pigment pellet. Like SILVET “J” products, SILVET AD grades provide excellent compatibility, ease of handling and ease of dispersion.


TECHNICAL DATA

Aluminum Flake Content (Calculated)

80.0% nominal by weight

Particle Size-Microns (Target)

11

Non-Volatile By Weight (Target)

99.0% min by weight at 120ºC

Carrier

Aldehyde Resin

Carrier Percentage

20.0% nominal by weight


INCORPORATION GUIDELINES

The recommended method of dispersion is to soak the granules in one to two times their weight of solvent, then mix gently to a creamy consistency, free of agglomerates by low shear stirring. When completely dispersed, the balance of the formulation may be slowly added under gentle but efficient agitation. High shear mixing should be avoided as it bends and breaks the aluminum flakes, causing darkening and loss of reflectivity.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2022 Silberline Manufacturing Co., Inc. All Rights Reserved.