Product Information

Silberline Start

01SPARKLE SILVET® Ultra 0017-30-E1

SPARKLE SILVET® Ultra 0017-30-E1 Aluminium Pigment

PRODUCT DESCRIPTION

SPARKLE SILVET Ultra 0017-30-E1 is an extremely bright, silver dollar aluminum pigment produced in pellet form to reduce the potential for generating airborne particles and to improve ease of handling. In addition, the low shear manufacturing process produces pellets that are easy to disperse by most plastics processing equipment. Due to its high brilliance and controlled particle size, it can be used to produce the appearance of brushed steel or anodized aluminum. When used with transparent pigments or dyes, this grade will produce exceptionally clean bright metallic colors. SPARKLE SILVET Ultra 0017-30-E1 is suitable for use in both plastics and powder coatings applications.

-Aluminium pigment granules

-Non-leafing

-Fine particle size, silver dollar


PRODUCT APPLICATION

SPARKLE SILVET Ultra 0017-30-E1 is easy to disperse and is compatible with a variety of polymers, particularly polyolefins. It is typically used to make concentrates or compounds for use in final processing by injection molding, extrusion, blow molding or thermoforming processes. In some cases, SPARKLE SILVET Ultra 0017-30-E1 can be used in end use processing but care must be taken to assure complete dispersion is achieved. The pellet form of SILVET® E1 grades make them easy to handle and incorporate.


TECHNICAL DATA

Composition

70% (+/- 2%) Al Flake

Composition

30% (+/- 2%) Carrier

Specific Gravity

ca 1.72

Carrier

PE Wax

Non-Volatile By Weight (Target)

98.5% by weight

Particle Size-Microns (Target)

17


INCORPORATION GUIDELINES

It is normally sufficient to tumble blend the pellets with the base resin and any additional colorants or additives before processing. Incorporation techniques should not subject the flakes to high shear forces.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.