Product Information

Silberline Start


SPARKLE SILVEX ULTRA 0008-20-C Aluminum Pigment


Sparkle Silvex Ultra 0008-20-C is a fine particle size, clean, bright automotive quality aluminum pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. The pigment flake has a silver dollar geometry. The particle size distribution range is highly controlled to produce very clean chromatic effects when used with transparent pigments and dyes. This grade will produce very clean metallic effects with fine grain aesthetics when used alone or with other pigments.

-Fine SPARKLE SILVER ULTRA® flake grade

-Damp powder



Sparkle Silvex Ultra 0008-20-C is composed of aluminum pigment flakes dampened with a plasticizer to help prevent the individual flakes from becoming airborne during handling and processing. It is well suited for use in liquid colorant applications where processing temperatures are below the volatilization point of the carrier. It is compatible with a variety of resins including polyolefins and styrene. Sparkle Silvex Ultra 0008-20-C is dampened with a pharmaceutical grade mineral oil and is suitable for applications that require FDA compliance. Specific FDA compliance information is available upon request. In order to maintain optimum aesthetics, Sparkle Silvex Ultra grades should be dispersed properly.


Non-Volatile By Weight (Target)

98.5% by weight

Particle Size-Microns (Target)


Specific Gravity

ca 1.91


80.0% (+/- 2%) Al Flake


20.0% (+/- 2%) Carrier


Mineral Oil

Carrier Content


Flash Point

430 Degrees F


Sparkle Silvex Ultra aluminum pigments consist of aluminum pigment flakes dampened with a liquid plasticizer. Incorporation techniques should include the addition of an appropriate medium, such as additional plasticizer to allow the individual flakes to disassociate and distribute evenly. This can be done by adding an equal amount of plasticizer to the Sparkle Silvex Ultra 0008-20-C and letting the mixture set until it becomes soft and can be mixed thoroughly under low shear until smooth.


Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.

All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.