Product Information

Silberline Start

01SPARKLE SILVEX® 730-20-C

SPARKLE SILVEX® 730-20-C Aluminum Pigment

PRODUCT DESCRIPTION

SPARKLE SILVEX 730-20-C is a very coarse, very bright high sparkle aluminum pigment dampened with mineral oil to minimize the potential for generating airborne pigment particles. This grade will produce an extremely bright strong metallic effect when used alone or with chromatic pigments or dyes. Because of its very large particle size and cornflake geometry, it can produce a coarse grain high sparkle effect when used at high loading levels or a mild glitter effect when used at low loading levels. Because of its broader particle size distribution range, it will not produce the strong glitter effects obtainable with the “glitter series” pigments.

-Coarse, high Sparkle flake grade

-Damp powder

-Non-leafing


PRODUCT APPLICATION

SPARKLE SILVEX C grades are aluminum pigment flakes dampened with a plasticizer to help prevent the individual flakes from becoming airborne during handling and processing. They are well suited for use in liquid colorant applications where processing temperatures are below the volatilization point of the carrier. SPARKLE SILVEX C grades are compatible with a variety of resins including polyolefins and styrene. SPARKLE SILVEX C grades are dampened with a pharmaceutical grade mineral oil and are suitable for applications which require FDA compliance. Specific FDA compliance information is available upon request. In order to maintain optimum aesthetics, SPARKLE SILVEX grades should be dispersed properly.


TECHNICAL DATA

Composition

80.00% aluminum flake

Composition

20.00% carrier

Carrier

DIDP

Particle Size-Microns (Target)

250

Specific Gravity

ca 1.91

Flash Point

430 Degrees F


INCORPORATION GUIDELINES

SPARKLE SILVEX aluminum pigments consist of aluminum pigment flakes dampened with a liquid plasticizer. Incorporation techniques should include the addition of an appropriate medium, such as additional plasticizer to allow the individual flakes to disassociate and distribute evenly. This can be done by adding an equal amount of plasticizer to the SPARKLE SILVEX and letting the mixture set until it becomes soft and can be mixed thoroughly under low shear until smooth.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.