Product Information

Silberline Start


LED-2314AR Aluminum Pigment


LED-2314AR is manufactured by incorporating a small amount of Teflon* with a coated or treated aluminum pigment and then, through further processing, is provided in a dry, non-dusting form. LED-2314AR is a polymer treated, fine particle size, non-leafing, silver dollar lenticular aluminum pigment. LED-2314AR is suitable for use in powder coatings applications.


-Dedusted Flake


The polymer treatment on the flake imparts excellent chemical and environmental resistant properties and is specified in high-end, bonded metallic powder coating applications.


Screen Analysis (Max Retained)

Non-Volatile By Weight (Target)

99.4% by weight

Particle Size-Microns (Target)



The incorporation of a small amount of Teflon* which renders the product dedusted imparts unique requirements for dispersion. Requests for dispersion techniques should be referred to Silberline’s Technical Service department.

*Trademark of E.I. DuPont DeNemours & Company, Inc.


Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.

All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2023 Silberline Manufacturing Co., Inc. All Rights Reserved.