Product Information

Silberline Start

01SILBERCOTE AQ-G E354

SILBERCOTE AQ-G E354

PRODUCT DESCRIPTION

-Non-leafing Silver Dollar aluminum pigment granule

-Medium-Coarse particle size

-Inhibited and surface treated for waterbased systems

-Supplied as a solvent-free soft granule


PRODUCT APPLICATION

SILBERCOTE AQ-G E354 is a medium-coarse particle size silver dollar pigment, encapsulated for use in waterborne paint systems. It is supplied in the form of a soft granule, carried in a combination of surfactants and dispersants. It has excellent compatibility with solvents typically used in waterborne paint systems, including glycols, alcohols, acetates and water, and provides greater hiding power then the equivalent paste grade. Gassing performance is equivalent or better compared to paste form.


TECHNICAL DATA

Non-Volatile By Weight (Target)

99.5% (minimum)

Particle Size-Microns (Target)

26µm by Malvern Mastersizer

Aluminum Flake Content (Calculated)

77% (nominal)

Silica Treatment

8% (nominal)

Carrier Percentage

15% (nominal)


INCORPORATION GUIDELINES

Dispersion is easily achieved by direct incorporation of the granule into the resin system, using low energy stirring with a slow speed blade capable of moving the whole mass. This premix is then slowly added to the agitated bulk of the binder. If it is necessary to use high shear to dissolve or disperse any component of the binder, this should be done before introducing the premix. The final pH should be as close to neutral as possible. High shear should be avoided as it bends and breaks the flakes, reducing both brightness and gassing resistance. As the water stability of this grade may be system dependent, trials are recommended to verify the required level of performance.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2022 Silberline Manufacturing Co., Inc. All Rights Reserved.