Product Information

Silberline Start

01AGS-16135

AGS-16135

PRODUCT DESCRIPTION

Aqua Green Stabilizer series grades are environmentally friendly water-based aluminum pigments, which are developed with the latest water-based stabilization technology by Silberline. They provide excellent compatibility with various water-based systems, good chemical stability and pleasing aesthetic effect. Aqua Green Premier series grades with environmentally friendly features can meet customer requirement of environmental regulations. AGS-160135 is a coarse particle size, non-leafing grade in paste form. It provides good hiding opacity and good whiteness appearance. Appearance: Silver white, smoothness


PRODUCT APPLICATION

AGS-160135 is suitable for waterborne general industrial coatings, including waterborne textile coating, waterborne fluorocarbon coating, waterborne mechanical engineering coating and waterborne bicycle coating etc.


TECHNICAL DATA

Grade

325 mesh grade

Screen Analysis (Max Retained)

1.0 Maximum

Non-Volatile By Weight (Target)

70% by weight

Particle Size-Microns (Target)

35

Shelf Life

365 days from manufacture date.


INCORPORATION GUIDELINES

The paste should be soaked for one or two hours in about 1:1 or 1:2 weight of a bridging solvent, such as butyl glycol. Dispersion is then achieved by low energy stirring, using a slow speed blade capable of moving the whole mass. Further solvent, water or medium may be added at this stage. When a smooth consistency, free of soft aggregates has been obtained, the balance of the formulation may be slowly added. High shear should be avoided as it bends and breaks the flakes, reducing their brightness. As the water stability can be system dependent, small-scale trials should be carried out to verify the required level of performance.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.