Product Information

Silberline Start

01AQUAVEX® L010

AQUAVEX® L010 Aluminum Pigment

PRODUCT DESCRIPTION

– Super Fine – Solvent Free – Very reflective, high coverage, silver effect – This grade is typically used for water based flexographic or gravure inks

-Passivated for water-based systems

-Cornflake


PRODUCT APPLICATION

AQUAVEX L010 contains super fine particle size, uniformly reflective, leafing aluminum flake pigment, in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks [flexo or gravure] and some water-based industrial paints.


TECHNICAL DATA

Non-Volatile By Weight (Target)

98.5% minimum

Particle Size-Microns (Target)

10

Aluminum Flake Content (Calculated)

80.0% nominal

Carrier Percentage

20.0% nominal

Carrier

Surfactant


INCORPORATION GUIDELINES

Though satisfactory results may be obtained by careful addition of AQUAVEX L010 to the liquid vehicle, the recommended method of incorporation is to briefly soak the product in 1-2 times its own weight of water. Dispersion is achieved by low energy stirring, using a slow speed blade capable of moving the whole mass. This premix is then slowly added to the agitated bulk of the water-based binder system.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.