Product Information

Silberline Start

01SBC AQ J9010

SBC AQ J9010

PRODUCT DESCRIPTION

SBCAQJ9010 is developed by latest silica encapsulation technology together with special processing design. It provide a perfect combination of barrier protection for the aluminum surface and improved optical effects. The unique surface treatment provides excellent gassing stability, chemical resistance and weather resistance also circulation stability.

-Non-leafing

-Waterborne

-Silver Dollar


PRODUCT APPLICATION

SBCAQJ9010 is widely used in many types of water-based paints and coatings such as electronic appliances coatings, automotive OEM / refinish paints, general industrial paints, etc.


TECHNICAL DATA

Grade

325 mesh grade

Screen Analysis (Max Retained)

0.5 Maximum

Non-Volatile By Weight (Target)

58% by weight

Particle Size-Microns (Target)

12

Moisture Content

0.15 Maximum

Shelf Life

365 days from manufacture date.


INCORPORATION GUIDELINES

Though satisfactory results may be careful addition of the product to the liquid vehicle, the recommended method of incorporation is to briefly soak the product in 1-2 times its own weight of water or co-solvent. Dispersion is achieved by low energy stirring, using a slow speed blade capable of moving the whole mass. The pre-mix is then slowly added to the binder, this should be down before introducing the pre-mix. High shear should be avoided, as it bends and breaks the flakes, reducing both brightness and gassing resistance. As the water stability of this grade may be system dependent, trials are recommended to verify the required level of performance.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.