Product Information

Silberline Start

01SILBERCOTE® 303-20Z

SILBERCOTE® 303-20Z Aluminum Paste

PRODUCT DESCRIPTION

SILBERCOTE 303-20Z is a medium particle size, very bright, non-leafing, lenticular or silver dollar aluminum pigment. This product is a resin treated pigment carried in mineral spirits and provided in a paste form. SILBERCOTE 303-20Z is suitable for use in general industrial and automotive coatings

-Non-leafing


PRODUCT APPLICATION

SILBERCOTE Z polymer treated aluminum pigments are resistant to acid and alkali staining, while providing enhanced electrical charge resistance in finished coatings. Product is typically formulated into liquid coatings for plastic substrates. This product is recommended for automotive parts and accessories, automotive interior and consumer electronics applications.


TECHNICAL DATA

Grade

325 mesh grade

Screen Analysis (Max Retained)

1%

Non-Volatile By Weight (Target)

55% by weight

Non-Volatile By Volume (Calculated)

31.3% by volume

Particle Size-Microns (Target)

20

Aluminum Flake Content (Calculated)

44.9% minimum by weight

Specific Gravity

1.19

Weight Volume (lbs/gallon)

9.93

Weight Volume (kgs/liter)

1.19

Solvent

Mineral Spirits


INCORPORATION GUIDELINES

The paste should be pre-soaked in a solvent at a paste:solvent ratio of between 1:1 to 1:3 Pre-soaking generally takes from one to eight hours. Finer grades typically take longer than coarser grades. Use low shear, slow speed mixing to achieve a smooth consistency free of agglomerates. High shear dispersion techniques should be avoided, as they will distort the aluminum flakes.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.