Product Information

Silberline Start

01SPARKLE SILVET® Premier 860-20-P

SPARKLE SILVET® Premier 860-20-P Aluminium Pigment

PRODUCT DESCRIPTION

SPARKLE SILVET Premier 860-20-P is based on an automotive quality medium particle size aluminum pigment pellet with silver dollar geometry. Because of the flake geometry and the narrow particle size distribution range, this product will produce a very clean, bright metallic appearance and is well suited for use with transparent pigments or dyes. The acrylic carrier is compatible with a variety of engineering resins but is not recommended for use with polyolefins. SPARKLE SILVET Premier 860-20-P is suitable for use in both plastics and powder coatings applications.

-Medium particle size, silver dollar

-Aluminium pigment granules

-Non-leafing


PRODUCT APPLICATION

SPARKLE SILVET Premier is recommended for use with engineering resins or transparent polymers where compatibility, maintenance of polymer clarity and distinctness of image (D.O.I.) observed from the finished part are important. SILVET® 860-20-P is compatible with polycarbonate, ABS, ASA, acrylic and other high-end resins. SILVET P grades are not recommended for use with polyolefins, which are more effectively pigmented with SILVET E, SILVET E1 or SILVEX® products.


TECHNICAL DATA

Particle Size-Microns (Target)

24

Non-Volatile By Weight (Target)

98.5 minimum by weight

Specific Gravity

ca 1.93

Composition

80% (+/- 2%) Al Flake

Composition

20% (+/- 2%) Carrier

Carrier

Acrylic


INCORPORATION GUIDELINES

It is normally sufficient to tumble blend the pellets with the base resin and any additional colorants or additives before processing. Incorporation techniques should not subject the flakes to high shear forces.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.