Product Information

SPARKLE SILVER 3334-AR is a high purity, non-leafing, aluminum pigment. It was developed for automotive O.E.M. finishes where sparkle and brilliance are needed with good control of flake orientation and distinctness of image (D.O.I.).

-Non-leafing

-High purity

SPARKLE SILVER 3334-AR is primarily used for automotive finishes where high coverage is desirable. It shows excellent resistance to spotting when incorporated into paint finishes. The control of particle distribution permits the formulation of one-coat, seed free finishes with high gloss, and is especially beneficial in two-coat applications.

The paste should be pre-soaked in a solvent at a paste:solvent ratio of between 1:1 to 3:1. Pre-soaking generally takes from one to eight hours. Finer grades typically take longer than coarser grades. Use low shear, slow speed mixing to achieve a smooth consistency free of agglomerates. High shear dispersion techniques should be avoided, as they will distort the aluminum flakes.

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.

All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.