Product Information

Silberline Start

01SPARKLE SILVER® E-3199-AR

SPARKLE SILVER® E-3199-AR Aluminium Paste

PRODUCT DESCRIPTION

This pigment has a specially controlled particle size range that makes it suitable for both one and two-coat automotive and industrial coatings. Good orientation gives a brilliant sparkling finish. Good face whiteness and high flop tone with more hiding and tint strength than SPARKLE SILVER E 3166-AR have led to very widespread use of this grade by formulators.

-Non-leafing

-High purity

-Coarse particle size, cornflake


PRODUCT APPLICATION

This pigment has a specially controlled particle size range that makes it suitable for both one and two-coat automotive and industrial coatings. Good orientation gives a brilliant sparkling finish with good face whiteness and high flop tone with more hiding and tint strength.


TECHNICAL DATA

Screen Analysis (Max Retained)

99% minimum through 325 mesh

Non-Volatile By Weight (Target)

60% minimum by weight

Particle Size-Microns (Target)

31

Moisture Content

0.15% maximum

Specific Gravity

1.38

Solvent

Mixture of mineral spirits and high aromatic


INCORPORATION GUIDELINES

The paste should be soaked in about its own weight of solvent, ideally for one to eight hours. If using solvent alone is not feasible, the liquid coating medium can be substituted, but the dispersion time may be extended. Dispersion is best achieved by low energy stirring, using a slow speed blade capable of moving the whole mass. Further solvent or medium may be added at this stage. When a smooth consistency, free of soft aggregates has been obtained, the balance of the formulation may be slowly added. High shear should be avoided as it bends and breaks the flakes, reducing their brightness.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.