Product Information
01
TUFFLAKE® Premier 018
TUFFLAKE® Premier 018 Aluminum Pigment
TUFFLAKE Premier 018 is a medium particle size, very bright, circulation-resistant silver dollar aluminum pigment. It offers a bright face and a dark flop with a clean, brilliant sparkle. This product is recommended for use in high quality automotive finishes and on automotive component parts where good hiding and improved chromatic pigment development are required.
-Circulation-Resistant
-Regular Purity
-Non-leafing
-Silver Dollar
-OEM/Refinish
TUFFLAKE Premier 018 is applicable for use in automotive OEM, refinish, and wheel coatings. It is a circulation-resistant aluminum pigment specifically designed to withstand mechanical forces and maintain its target appearance. It performs well in both electrostatic Bell and air assisted applications. It is recommended for base coat/clear coat finishes resulting in high gloss.
Grade |
325 mesh grade |
Screen Analysis (Max Retained) |
0.01% |
Non-Volatile By Weight (Target) |
78% by weight |
Non-Volatile By Volume (Calculated) |
51.8% by volume |
Particle Size-Microns (Target) |
18 |
Specific Gravity |
1.79 |
Weight Volume (lbs/gallon) |
14.91 |
Solvent |
Mixture of Mineral Spirits and High Aromatic |
Bulking Gallons Pounds |
0.067 |
The paste should be pre-soaked in a solvent at a paste: solvent ratio of between 1:1 to 3:1. Pre-soaking generally takes from one to eight hours. Finer grades typically take longer than coarser grades. Use low shear, slow speed mixing to achieve a smooth consistency free of agglomerates. High shear dispersion techniques should be avoided as they will distort the aluminum flakes.
Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.
All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2025 Silberline Manufacturing Co., Inc. All Rights Reserved.