Product Information

Silberline Start

01AQUAVEX® PLUS PREMIER 011

AQUAVEX® PLUS PREMIER 011

PRODUCT DESCRIPTION

-Non-leafing fine particle size aluminium pigment in a non-ionic surfactant carrier

-Bright silver dollar with good opacity

-Passivated for use in water-based systems

-APEO/NPEO free

-Good adhesion, “split proofness”


PRODUCT APPLICATION

AQUAVEX Plus PREMIER 011 is a fine particle size “silver dollar” pigment supplied in a pellet form. Resistance to tape testing/”split proofness” is dependent on the ink formulation. The pigment is passivated to resist aqueous attack and is combined with non-ionic surfactant (alcohol ethoxylate) to give pellets having the properties of low dusting and easy dispersibility in water. It exhibits good opacity, resulting in a lower pigment usage. Recommended applications are water-based inks.


TECHNICAL DATA

Particle Size-Microns (Target)

11µm typical (by Malvern Mastersizer)

Aluminum Flake Content (Calculated)

75% nominal (w/w)

Non-Volatile By Weight (Target)

98.5% minimum

Carrier

Alcohol ethoxylate,passivating agents

Carrier Percentage

25% nominal (w/w)


INCORPORATION GUIDELINES

The recommended method of dispersion is to soak the granules in 1-2 times their weight of water for a maximum of eighteen hours, then mix gently to a creamy consistency, free of agglomerates by low shear stirring. When completely dispersed, the balance of the formulation may be slowly added under gentle but efficient agitation. To avoid damage to the pigment flakes that could induce gassing and reduce the metallic effect, agitation should be efficient but low shear. If it is necessary to use high shear to dissolve or disperse any component of the binder, this should be done before introducing the aluminium pigment. The final pH should be as close to neutral as possible. As the water stability of this grade is very system dependent, small – scale trials are recommended to verify the required level of performance.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.