Product Information

Silberline Start

01AGS-33200

AGS-33200

PRODUCT DESCRIPTION

AGS-33200 is environmentally-friendly water-based aluminum pigments newly developed by Silberline with the newest water stabilization technology, which exhibits excellent compatibility, chemical stability and pleasant optical effect in water-based coating system. The AGS 33000 series can easily disperse in water and reach the same metallic effect as solvent base.

-Non-Leafing

-Silver-dollar


PRODUCT APPLICATION

AGS-33200 is suitable for waterborne general industrial applications such as textile coating, PVDF coating, engineering mechanical coating and motor vehicle parts and bicycle coating etc. Also it be used for WB inks applications.


TECHNICAL DATA

Grade

325 mesh grade

Screen Analysis (Max Retained)

1.0 Maximum

Non-Volatile By Weight (Target)

66% by weight

Particle Size-Microns (Target)

20

Moisture Content

0.15 Maximum

Shelf Life

365 days from manufacture date.


INCORPORATION GUIDELINES

The paste should be soaked for 1-2hs in about 1;1 or 1:2 weight of a bridging solvent, such as alcohol ether/ DI water. Dispersion is then achieved by low energy stirring, using a slow speed blade capable of moving the whole mass. Further solvent, water or medium may be added at this stage. When a smooth consistency, free of soft aggregates has been obtained, the balance of the formulation may be slowed added. High shear should be avoided, as it bends and breaks the flakes, reducing their brightness. As the water stability can be system dependent, small-scale trials should be carried out to verify the required level of performance.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.