Product Information

Silberline Start

01AS-225N

AS-225N

PRODUCT DESCRIPTION

AS225N is a medium particle size, with unique manufacturing techniques, providing excellent metallic effect, excellent paints making adaptability. It is specially designed for coil coatings application, also suitable for a variety of paints.

-Non-Leafing

-Similar “silver dollar” geometry


PRODUCT APPLICATION

AS225N is specially designed for coil coating application. It is well used in variety of resin system such as acrylic, polyester, PVDF with excellent system compatibility and chemical stability.


TECHNICAL DATA

Grade

325 mesh grade

Screen Analysis (Max Retained)

1.0 Maximum

Non-Volatile By Weight (Target)

62% by weight

Particle Size-Microns (Target)

26

Moisture Content

0.15 Maximum

Shelf Life

365 days from manufacture date.


INCORPORATION GUIDELINES

Though satisfactory results may be obtained by careful addition of the product to the liquid vehicle, the recommended method of incorporation is to briefly soak the product in 1-2 times its own weight of co-solvent. Dispersion is achieved by low energy stirring, using a slow speed blade capable of moving the whole mass.This pre-mix is then slowly added to the agitated bulk of the binder. If it is necessary to use high shear to dissolve or disperse any component of the binder, this should be done before introducing the pre-mix. High shear should be avoided as it bends and breaks the flakes, reducing both brightness. This grade may be system dependent, trials are recommended to verify the required level of performance.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.